BT 3000 Classic - Manual (Page 39)

Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
35
To reset the handset to its
original settings
Press the SET button.
Press the 1 button.
Press the 8 button.
Press the OK ( )
button.
KEYPAD Enter the handset PIN
(original setting
0000 ).
Press the OK ( )
button.
Press the 0 button.
Press the OK ( )
button to confirm.
Press the RED PHONE
button to return to
standby.
1
8
TUV
0
It will delete:
– Numbers stored in the speed
dial memory.
– Numbers in the redial
memory.
This will NOT reset:
– The handset PIN.
– Registration to the base station.
This will reset:
– Handset earpiece
volume to 1
– Auto talk to ON
– Button beeps to ON
– Battery warning beep to ON
– Confirmation beep to ON
– Handset ringer volume to 5
– Handset ringer tone to 1
– Ring priority OFF
Call allocation
If you have registered additional
handsets with your Diverse 3000
Classic base station you can
specify the way you wish the
phones to ring.
Group ringing
Your Diverse 3000 Classic will
ring all handsets registered to its
base whenever there is an
incoming call. This is called group
ringing.
Ring priority
Your Diverse 3000 Classic can be
set so that an incoming call will
ring first at a preferred handset.
If there is no answer, the call will
revert to all other handsets.
This is called ring priority. Your
Diverse 3000 Classic is preset for
group ringing.
Diverse 3000 H_set & Charger 22/3/01 1:55 pm Page 35