BT 3000 Classic - Manual (Page 29)

Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
25
Directory for barred/enabled
numbers
Press the OK ( )
button. Display shows
the first location.
Press the MEMORY
button if necessary to
scroll to the location you
want
1-5 .
Press the OK ( )
button.
Enter the number you
want to bar, enable or
change. Press the
button to delete digits.
Press the OK ( )
button to confirm.
Press the RED PHONE
button to return to
standby.
Once you have set the
numbers you want, you
can then switch call
barring/enabling on or
off at any time (see below).
You can do this from any
handset registered to the
base station.
Press the SET button.
Press the 0 button twice.
Press the OK ( )
button.
KEYPAD Enter the base station
PIN (original setting
0000 ).
Press the OK ( )
button.
Press 1 to bar the
numbers you
have stored.
3 to enable
handsets to dial
only the
numbers stored.
0 to switch call
barring/call
enabling off.
Press the OK ( )
button to confirm.
Press the RED PHONE
button to return to
standby.
Please Note
The barred or enabled numbers
must be switched on before you can
use. See opposite.
01 1
Blank.
Memory
location (1-5).
Function
number entered
previously.
0
1
3
DEF
0
Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 25