BT 3000 Classic - Manual (Page 13)

Place the handset on the charger.
When charging the battery level
symbol shown on the display
flashes.
When charging for the first
3
time, we recommend that
you let the batteries charge
for the full 16 hours before
making or receiving calls
Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
1
Install the rechargeable
batteries in the handset
Slide battery cover down and lift
off.
9
Follow these steps to get your
Diverse 3000 Classic Handset
and Charger ready for use.
Plug the power cable into the
power socket on the underside of
your Diverse 3000 Classic Charger.
To wall mount your Diverse 3000
Classic Charger, see page 46.
2 Connect the power cable
Setting up
Please Note
Battery display when inserting or
replacing a battery.
When you replace the handset
batteries with ones that have been
fully charged, the battery indicator
will not show full until the next
charge cycle has been completed.
Charge the handset until the
batteries register full again. From
then on the display will be correct.
Battery performance
After charging your Diverse 3000
Classic handset for the first time,
subsequent charging time for the
handset batteries is approximately
4-5 hours. Batteries and case may
become warm during charging.
This is normal.
Diverse 3000 H_set & Charger 22/3/01 1:53 pm Page 9