CounterPath Bria 3.0 for Mac User Guide – Enterprise Deployments - Manual (Page 8)

CounterPath Corporation
4
2.2 Starting Bria
First-time Startup
If Bria is not already running, start it as you would any other program. The Bria Login dialog appears with the
Profile set to “Manually configure login server”.
1. Set the profile to the value specified by your system administrator and click Continue (or Log in).
Typically:
• No login required: Used if you will manually configure Bria, as described below.
• Manually configure login server: Used if Bria will be automatically configured for you but you must
manually enter the server address (as provided by your system administrator).
2. If you chose the “Manually configure” profile, the login dialog appears for you to enter the login server
(“Manually configure” profile only) and your credentials. This information is provided by your system
administrator.
Press Login; the softphone GUI appears.
Subsequent Startups
After the first-time startup, the Bria Login dialog will not appear if you selected the No login required profile.
(If you started up the first time with “No login required” but in fact you do need to log in, go to the menu and
choose Bria > Preferences. Click the Application tab and enable login. See page 57.)