CounterPath eyeBeam 1.5 User Guide for Mac - Manual (Page 51)

CounterPath eyeBeam 1.5 for Mac
48
Port Used on Local Computer
Manually specify range The appropriate setting depends on your computer setup:
• Checked: If your computer is behind a restrictive firewall that only allows
specific port ranges to be used. Enter the range of ports to use for your SIP
account. (You must also open those ports on your firewall; refer to applicable
firewall documentation for information.)
• Unchecked: If your computer is not behind a restrictive firewall.
XTunnels
Use XTunnels The appropriate setting for XTunnels depends on whether your VoIP service
provider has an XTunnels server.
• Automatic: Use XTunnels when eyeBeam detects a firewall that prohibits
communications. This is the recommended setting if your service provider
has an XTunnels server.
• Always: Always use XTunnels.
• Never: Do not use XTunnels. This is the correct setting if your service
provider does not have an XTunnels server.
Server address Optionally, specify the name or IP address of the XTunnels server to use.
• If the field completed, eyeBeam will use that server.
• If it is blank, eyeBeam will perform a DNS lookup to discover the server.
Use SIP user login and password Check this box to use the username and password from your SIP account in order
to log into the XTunnels server.
Otherwise, uncheck this box and complete the Username and Password fields.
Table 10: Account Properties – Topology
Field Description