Control Company 5035 ADVANCED MEMORY TIMER - Manual

SPECIFICATIONS:
Display: 6-Digit LCD showing hours,
minutes, and seconds.
Accuracy: 6/1000 of a second.
Timing Capacity: 1 second to 23 hours, 59
minutes, 59 seconds.
Alarm: Audible and visual.
Memory: Automatic recall of last
programmed time.
Functions: Countdown timing and countup
(stopwatch) timing.
Attachments: Clip, magnetic back, and stand.
Clock: Time-of-day with AM/PM indicators.
COUNT DOWN ALARM TIMING
1. Switch the TIMER/CLOCK slide switch to
TIMER. The display will show TIMER on
it. If the timer is running press STOP and
then press RESET. The display should
read 0:00 00.
2. Press the HR (hour) button to advance
the hour digits. Each press is confirmed
with a sound. Press and hold down the
HR button to rapidly advance hours.
Press the MIN (minute) button to advance
the minutes digits. Each press is confirmed
with a sound. Press and hold down the MIN
button to rapidly advance minutes.
Press the SEC (second) button to advance
the seconds digits. Each press is confirmed
with a sound. Press and hold down the
SEC button to rapidly advance seconds.
3. When the desired amount of time appears
on the display, press the START button to
begin timing down.
4. When the timer reaches zero an electronic
tone will sound and the display will flash
TIME’S-UP. The tone will sound for one
minute and then turn off automatically to
preserve battery life. To turn the audible
alarm off manually, press any button.
At zero the timer begins timing up. This
feature displays the amount of time which
has elapsed since zero. When the alarm
is sounding, the first press of any button
turns off the electronic tone and stops
the UP timing. Press RESET to clear the
display. The timer will only clear when time
is stopped.
CORRECTING AN ENTRY
If an error is made during an entry, press the
RESET button to clear the display to zero. If
you wish to clear an entry when time is running,
you must first stop the timing by pressing the
STOP button, then press the RESET button.
The timer will only clear when time is stopped.
MEMORY FUNCTION
When timing repetitive intervals, the memory
function will recall the last programmed
time. It allows the user to dedicate the timer
to a frequently timed test. The timer will return
to the desired time period again and again.
Set a programmed time. Press START. When
the alarm sounds, press any button to stop
the tone from sounding and to stop the time.
Press the START button to display the original
programmed time. The display will show
MEMORY TIMER. Press the START button to
begin a memory time.