Control Company 1045 WATER/SHOCK RESISTANT STOPWATCH - Manual

SPECIFICATIONS
Display:
½''-High LCD shows hours, minutes, seconds, date
Accuracy: 0.01%
Resolution: 1/100 second for first 30 minutes, 1 second after 30 minutes
Timing Channels: one
Timing Capacity: 23 hours, 59 minutes, 59 seconds – count up
Functions: single action, time-out, cumulative split, time of day with 12/24
hour format, alarm, and date
Alarm: Audible alarm sounds for one minute
Attachments: Lanyard
Clock: yes
Size: 2.5” x 2.25” x .5”
Weight: 1 oz
Single Action Timing
1. Press MODE button until three flashing bars appear on display under SU, FR, and
SA.
2. Press SPLIT/RESET button to clear display to zero. Display should read 0:00 00.
3. Press START/STOP button once to begin count-up timing.
Note: Bars under SU and SA continue to flash throughout timing to 30 minutes. After
30 minutes, only bar under SU continues to flash.
4. To stop timing event, press START/Stop button once. Note: Bars continue to flash
during time out.
5. Press SPLIT/RESET button to clear display.
Time-in/Time-out
Stopwatch may be paused at any time during timing event by pressing START/STOP
button once. To resume timing, press START/STOP button again. To end timing event
completely, press START/STOP, then press SPLIT/RESET to return display to 0:00 00.
Continuous Timing
When timing event lasts longer than 24 hours, stopwatch will roll over to zero and begin
counting up again.
Cumulative Split Timing
1. Press MODE button until three flashing bars appear on display under SU, FR, and
SA.
2. Press SPLIT/RESET button to clear display to zero. Display should read 0:00 00.
3. Press START/STOP button once to begin timing event.
4. Press SPLIT/RESET once to “freeze” display and take split time reading.
Note: Flashing colon (:) indicates internal clock is still running.
5. Press SPLIT/RESET button again to resume timing.
Note: Display instantly updates to show cumulative running time.
6. Any number of split time readings may be taken during a timing event.
7. To end timing event completely, press START/STOP, then press SPLIT/RESET to
return display to 0:00 00.
Timing Two Events
1. Press MODE button until three flashing bars appear on display under SU, FR, and
SA.
2. Press SPLIT/RESET button to clear display to zero. Display should read 0:00 00.
3. Press START/STOP button once to begin timing events.
4. Press SPLIT/RESET when first event ends.
5. Press STOP/START when second event ends.
6. Display will show total time of first event.
7. Press SPLIT/RESET one time. Display will show total time of second event.
8. Press SPLIT/RESET to return display to zero.
Set Time of Day and Date
1. Press MODE button until clock mode appears.
2. Time of day will appear. Seconds and bar under TU will flash.
3. Press START/STOP button to set seconds to zero.
4. Press SPLIT/RESET. Minutes will flash. Press START/STOP button to advance
minutes to desired time.
Note: Press and hold START/STOP button to advance minutes rapidly.
5. Press SPLIT/RESET again. Hours will flash. Press START/STOP button to advance
hours to desired time.
Note: Press and hold START/STOP button to advance hours rapidly.
Note: A next to minutes indicates A.M. P next to minutes indicates P.M.
Note: To display time in 24-hour format, press START/STOP button until H appears
next to minutes.
6. Press SPLIT/RESET again. DATE will appear on right-hand side of display. Number
will flash. Press START/STOP to advance number to today’s date.
Note: Press and hold START/STOP button to advance numbers rapidly.
7. Press SPLIT/RESET again. Number will flash. Press START/STOP to advance
number to desired month.
Note: Press and hold START/STOP button to advance numbers rapidly.
8. Press SPLIT/RESET again. Bars will flash under days of week (SU, MO, TU, WE,
TH, FR, SA). Press START/STOP until bar is flashing under desired day.
9. When desired time, date, month, and day are set, press MODE to save changes.
10.To view day, date, month on display, in time mode, press and hold START/STOP
button.
Set Alarm
1. Press MODE until alarm time appears. Bar under MO and hour number will flash.
2. Press START/STOP button to desired hour.
Note: Press and hold START/STOP button to advance hours rapidly.
3. Press SPLIT/RESET button again. Minute numbers will flash.
4. Press START/STOP button to desired minutes. A next to minutes indicates AM. P
next to minutes indicates PM.
Note: Press and hold START/STOP button to advance minutes rapidly.
5. When desired alarm time is set, press MODE to save changes.
6. To view alarm time on display, in time mode, press and hold SPLIT/RESET button.
Set Alarm On or Off
1. To turn alarm on: In time mode, press and hold down SPLIT/RESET button. Alarm
time will be displayed. Press START/STOP once – BEEP will sound and alarm
symbol will appear in upper right-hand corner of display.
2. To turn alarm off: Press and hold down SPLIT/RESET button again. Alarm time will
be displayed. Press START/STOP once – BEEP will sound and alarm symbol will
disappear from upper right-hand corner of display.
3. To turn off a sounding alarm, press either START/STOP or SPLIT/RESET button.
Set Hourly Alarm On or Off
To set alarm to BEEP once on each hour:
1. Press MODE until time of day is displayed.
2. Press and hold SPLIT/RESET.
3. Press MODE until all bars show SU MO TU WE TH FR SA .
4. Release SPLIT/RESET button.
5. Alarm will BEEP only one time each hour.
6. To turn off alarm on the hour, press and hold SPLIT/RESET. All bars will appear.
Press MODE one time – all bars will disappear.
Set Snooze Function On or Off
1. When alarm is sounding, press START/STOP. Alarm will stop sounding.
2. After 5 minutes, alarm will begin to sound again.
3. Press START/STOP to reset snooze function to sound again in 5 minutes.
4. To turn off snooze function completely, press SPLIT/RESET when alarm is sounding.
TRACEABLE
®
WATER/SHOCK RESISTANT STOPWATCH
TRACEABLE ® WATERPROOF/SHOCKPROOF STOPWATCH
INSTRUCTIONS