Ports and jacks, For a descr – chiliGREEN M860TU User Manual
Page 160
Interface (Ports & Jacks)
A - 2 Interface (Ports & Jacks)
A
Ports and Jacks
Item
Description
Card Reader
The card reader allows you to use the following digital storage cards:
MMC (MultiMedia Card)
RS MMC (requires PC adapter)
SD (Secure Digital)
Mini SD (requires PC adapter)
MS (Memory Stick)
MS Duo (requires PC adapter)
MS (Memory Stick Pro)
DC-In Jack
Plug the supplied AC/DC adapter into this jack to power your computer.
DVI-Out Port
The DVI-Out (Digital Visual Interface) Port is a video connector interface. This allows you to
connect an external monitor, TV or Flat Panel Display etc. as a display device
(see
) by means of a DVI cable. If you are using an older type of
monitor you will need to use a converter to convert the signal from DVI to VGA.
e-SATA/USB Port
This is a combined e-SATA (external Serial Advanced Technology Attachment)/ USB 2.0
compatible port.
Plug external Serial ATA hard drives into this e-SATA (external Serial Advanced Technology
Attachment) port. See
“USB 2.0/1.1 Ports” on page A - 4
for USB port information.
Note: The eSATA port only supports hot-swapping if you have selected AHCI mode in SATA
Mode Selection in the BIOS (see
“SATA Mode & eSata Port” on page 5 - 8
). If you have se-
lected IDE mode, then hot-swapping devices connected to the eSATA port is not supported.
Note that hot-swapping is NOT supported in the Windows XP O/S.
e-SATA
/