Log list search – CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual User Manual
Page 77
76 DIGITAL VIDEO RECORDER
4.Log List Search
The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１.
To start Event Search, press
[Log] button on IR Remote, then Log List Menu
pops up, as shown below.
MENU TAP
CONDITION
ALL
It has a list of all the events since the initial power on procedure of DVR
SYSTEM
It shows All System List.
NETWORK
It shows NETWORK List.
EVENT
It shows All Event except for Alarm, Motion, Video Loss and System.
VIDEO LOSS
It shows Video Loss List.
2. Use Up/Down buttons []
to desired “Time” to playback. Use Left/Right buttons
[] to move NEXT page.
3. Press [ENTER] button to start playback.