Smtp – CCTV Camera Pros iDVR-RT16 Real Time Stand Alone Surveillance DVR User Manual User Manual
Page 53
52 DIGITAL VIDEO RECORDER
2) Log: This DVR will mail Log list at selected intervals.
4. Attach Picture: While you are in recording mode, picture can be attached for mail.
5.
E-mail Address: 5 mail addresses can be configured for mail notification.
6.4. SMTP
This menu will be activated when you check
The following settings are only needed if you are NOT using the DVR mail server.
1. Server: Enter the e-mail server name or IP. To server name, using the virtual
keyboard, or pressing appropriate Numeric button on IR Remote or front panel.
2. Port : Define the port that the SMTP server will communicate through. By default, it
set to 25.
3. Authentication: Check this
4. User ID & Password: Enter the user ID/name and password for the SMTP Server.
(It is recognized as a small letter, even it‟s displayed as a Capital Letter).
5. Enter the password for the SMTP Server.
6. Save changes and exit the menu, press [MENU] button.
Exit the menu without making changes, press [CANCEL] button.