Caron 6044 - Manual (Page 19)

6024 & 6044 Series Operations Manual Rev F 02/14/12 Page 19 of 56
Installing Cell Roller Ramp & Support Kit (CELR301)
For applications that require a cell roller, a reinforced floor, cell roller ramp, and interior
outlet are provided with CELR301. The cell roller adaptor kit was designed around a 5
tier Wheaton R2P cell roller.
With the purchase of this kit, the standard interior shelving and pilasters are removed to
allow for the physical space of the cell roller. Support braces that have tracks to guide
the cell roller wheels into the incubator are factory installed. The cell roller ramp ships
inside the incubator. The ramp has small tabs at the end that fit into an opening at the
end of each cell roller support brace.
The ramp is designed to support the weight of the cell roller as it is pushed into the
incubator. Once the cell roller is pushed into the cabinet, remove the ramp and save it in
a convenient place should it need to be reused to remove the cell roller.
Cell rollers produce heat. The CARON model 6024 was designed to handle the heat
load of the Wheaton R2P five tier cell roller assuming the incubator is running in a
normal 70-74 degree lab ambient. Alternative manufacturers or models of cell rollers
have not been testing and may create too much heat to allow the incubator to properly
control temperature.
Cell Rollers can be heavy and awkward to
handle. Ensure that sufficient resources are
available to safely move the product.