Caron 7304 User Manual
Page 32
7300 Series Operations Manual
Rev A 3/26/2014
Page 32 of 80
A temperature setpoint window will appear. Enter the temperature setpoint by using
the keypad. For a set point of 20, press
(‘2’), then
(‘0’), followed by the
(Enter) key. Correct any mistakes with the
(Clear button) and reenter the
value. Once the Enter key has been pressed, the pop-up keypad disappears and the
screen returns to the Setpoint display with the new value of 20.0 °C in the temperature
set point button.
To change the parameters for the Nighttime setpoints, press the Night Setpoint button
and repeat same steps for Changing Temperature Set-point
Press the
(Home) button to return to the main screen.
Keypad
Home
Temperature
Setpoint Button