Barranca Diamond BD-2003E Pro Series Core Saw - Manual (Page 6)

6
BD-2003 CORE SAW SAFETY
DO NOT touch hot engine components while the machine is running or immediately after
operating.
NEVER touch the power cord with wet hands or while standing in water when it is con-
nected to a power source.
( (
)
)
This hazard symbol means “Over Speed.”
Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is
to be operated by trained and qualified personnel only! This equipment is for industrial use only.
The following safety guidelines should always be used when operating the BD-2003E Core Saw.
DANGER
RULES FOR SAFE OPERATION
• This equipment should not be operated by persons under 18 years of age.
GENERAL SAFETY
• NEVER operate this equipment without proper protective clothing, shatterproof
glasses, steel-toed boots and other protective devices required by the job.
• DO NOT operate or service this equipment before reading this entire manual.
Read and understand all warnings, instructions and controls on the machine.
• NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.
• NEVER operate this equipment under the influence of drugs or alcohol.
• Whenever necessary, replace nameplate, operation and safety decals when they be come difficult
to read.
• ALWAYS check the machine to see that keys and adjusting wrenches are removed from the machine
before it is turned on.
• ALWAYS wear proper respiratory, head, ear and eye protection
equipment when operating this machine.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in a
clean, dry location out of the reach of children.