Barranca Diamond BD-2003E Pro Series Core Saw - Manual (Page 22)

22
BD-2003 CORE SAW OPERATION & MAINTENANCE
(A)
If locked, loosen Cutting Head
knob by turning counter-clockwise
(A)
Inspect belts
(B)
Check tension
(C)
Loosen Mounting Bolts
This method is preferred when cutting small objects.
Cut in smooth, even strokes. DO NOT force the saw to cut.
1. If locked, loosen the Cutting Head Locking Knob by turning counter-clockwise.
2. Lower the Cutting Head until the Blade touches the Protective Wooden Strip.
3. Lock the Cutting Head in the “Down” position by turning clockwise.
1. Inspect the belts for cracks, fraying separation and wear
2. Lower the Cutting Head until the Blade touches the Protective Wooden Strip.
3. Lock the Cutting Head in the “Down” position by turning clockwise.
The BD-2003E is designed with dual power transmission belts. In order to ensure the BD-2003E op-
erates at peak efficiency, the two belts should be inspected monthly, and changed if they show signs
of damage and/or excessive wear.
NOTE: When new belts are installed, they should be inspected and re-tensioned after the first 48
hours of operation.
CUTTING WITH THE CUTTING HEAD LOCKED DOWN
BELT INSPECTION, ADJUSTMENT AND REPLACEMENT
CAUTION