Barranca Diamond BD-2003E Pro Series Core Saw - Manual (Page 18)

18
BD-2003 CORE SAW TRANSPORT
TRANSPORTING
CAUTION
The BD-2003E weighs approximately 162 lbs. Use proper lifting techniques and care when lifting
and transporting. NEVER transport the BD-2003E with water in the water basin.
1. Verify the Movable Cutting Head is locked in the down position and the Movable Cutting Table
is removed.
2. Position two people on either side of the saw.
3. From the side, grasp the front and rear of the saw.
4. Lift and transport the saw to the desired work location.
NOTE: Lock the Cutting Head in the “DOWN” position and remove the Movable Cutting Table
when transporting. The BD-2003E is equipped with forklift brackets for lifting and moving
the saw.
The BD-2003E is designed with legs in the front and rear for ease of transport. To transport:
Cutting Head Locked Down
Transporting the saw
Lift Point
Forklift Bracket
Remove Movable Cutting Table
Lift Point
Forklift Bracket