Barranca Diamond BD-2003E Pro Series Core Saw - Manual (Page 16)

16
* The BD-2003E Pro Series is also available with a 50hz motor.
BD-2003 CORE SAW PRODUCT SPECIFICATIONS
Motor Baldor 3HP
Voltage 230V
Motor RPM 3,450
Blade RPM 3,100
Blade Capacity 14” (350mm)
Arbor 1” (25mm)
Table Travel 29”
Max. Core Sample Length 12”
Max. Core Sample Diameter 5”
Min. Core Sample Diameter 1”
Weight 172 lbs.
L x W x H (in) 34” x 25” x 32”
L x W x H (mm) 940 x 584 x 737
Part # 158751
The BD-2003E Pro Series is a versatile Core Saw. Operated and used according to this manual, the
BD-2003E will provide years of dependable service.
SAW FEATURES
These precision built saws are designed for rapid and accurate sawing of exploratory core speci-
mens. The specialty designed 14” segmented diamond blade allows cutting of hard or dense rock
samples and engineered materials. The integral core holder provides for rapid and safe cutting of
cylindrical core samples. Adjustable height cutting head accommodates specimen sizes between 1”
and 5” in diameter.
GENERAL DESCRIPTION
MOTOR SPECIFICATIONS
The motor is protected by a thermal overload equipped with a manual reset.
THERMAL OVERLOAD PROTECTION
The BD-2003E is designed for use with a 14-inch diameter segmented wet or dry Barranca Diamond
blade with a .110 to .375 inch cutting width.
BLADE CAPACITY
NOTE: The BD-2003E is not designed to cut plastic or ferrous (metal) material.
Motor specifications for the BD-2003E are listed in the table below.