Atop Technology AW5500C User manual User Manual
Page 88
Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
83
5. Users can check connection situation by LED status. The follow table represents the
meaning of LED color.
Table 6.1
※ Limitation
After pressing P2P button, the whole pairing sequence time is 120 seconds, which
means user has to set both device in 120 seconds or pairing will be failed.
WDS protocol doesn’t support making multi AP to AP client link in the same time,
pairing two or more devices in the same time might cause pairing failed.
The pairing time might be influenced by environmental complexity.
LED State
Color
Off
Blinking
On
Orange P2P is not enabled.
P2P is connecting at
AP mode
Devic
e’s P2P mode is
enabled in AP mode.
Green
P2P is not enabled.
P2P is connection at
Client mode
Device’s P2P mode is
enabled in AP client mode.