Atop Technology AW5500C User manual - Manual (Page 84)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
79
6.3 Coverage Range Extender Setup
Extending from the above scenario, if the distance needs to be further extended, it is always
possible to add more AW5500C (in WDS Hybrid mode) in between the existing one. The WDS
MAC address of the newly added AW5500C (in WDS Hybrid mode) should be MAC address
of the AW5500C that it is directly connecting to, not the MAC address of the AW5500C in
WDS Root mode. Note that AW5500C in WDS Station mode does not allow both wireless
client and AW5500C (in WDS Hybrid mode) to connect in. Normally it should be the last
AW5500C in the wireless topology if utilized.
Figure 6.3
For more information on how to configure your AW5500C for this topology, please refer to
WDS Bridge Mode
Note: wireless coverage is dependent on the environment.