Atop Technology AW5500C User manual - Manual (Page 41)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
36
4.4.6 Advanced Settings
Provide details on wireless parameters for performance tuning. Changes in this section may
affect overall performance, so caution is recommended, if you are not clear of what you are
doing please refrain from altering them, Figure 4.16.
Figure 4.16
 Regulatory Domain defines the different parameters for antenna gain, transmit power,
channel selection, and so on that must be followed in different geographic areas. The
default setting is US(FCC 5_FCCA)
 TX Power is AW5500C ’s Transmission Power. The transmission power can be reduced
to prevent wireless interference to other wireless networks.
 Short GI is recommended to leave it as enabled to maximize the throughput.
 WMM or Wireless Multimedia Extension, which is recommended to leave as enabled in
order to comply with 802.11n standards and achieve link speeds higher than 54 Mbps.
 WPA Group ReKey Interval, WPA automatically changes secret keys after certain