Atop Technology AW5500C User manual User Manual
Page 81
Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
76
the settings selected on the previous page.
Enter the WEP key or the WPA passphrase if necessary.
Scroll to the end of the page and press
“Apply”, please wait for some time for the
changes to apply.
Then proceed to go to System Information, on the AP Client Information you can
confirm your AW5500C is connected to the Network selected if the status field displays a
signal percentage instead of disconnected. Also, you may also double check the wireless
connection status inside the client table of the connected AP.
Figure 5.7