Allen&Heath Xone DX - Manual (Page 58)

Allen & Heath User Guide for XONE:DX with Serato ITCH 1.7 58
ADDITIONAL SETUP
MIXER OPTIONS
GENERAL:
CROSSFADER - Use the dropdown menu to configure the crossfader. There are three options:
Normal: Standard crossfader style.
Reverse: Reversed crossfader aka hamster style.
Disabled: Crossfader is disabled.
EQ - Gives you the option to select either 6DB or 12DB of gain for your equalizers.
OUTPUT - Allows you to set the audio output to Mono or Stereo.
HEADROOM - Use this dropdown to select how much additional headroom you would like. Each chan-
nel initially has 3dB headroom. Less headroom results in a louder output.
CUE:
OVERDRIVE - Turns up the headphone volume.
CUE MIX - Allows you to adjust the balance of what you hear in the headphones. Turn the dial towards
MSTR to adjust the balance towards the MASTER output or towards CUE to adjust the balance towards
the CUE signal.
FADERS:
C/F CURVE - Adjusts the crossfader curve. Turn the dial to the left for a tighter "cut" and to the right
for a more gradual fade.
U/F CURVE - Adjusts the upfader curve. Turn the dial to the left for a tighter "cut" and to the right for
a more gradual fade.