AirLive WL-1600GL - Manual (Page 53)

Operation and Status
Figure 28: L2TP Status Screen
Data - L2TP Screen
Internet
Physical Address The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
IP Address The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
Connection Status
This indicates whether or not the connection is currently established.
• If the connection does not exist, the Connect button can be used
to establish a connection.
• If the connection currently exists, the Disconnect button can be
used to break the connection.
• Normally, it is not necessary to use the Connect and Disconnect
buttons unless the setting "Connect automatically, as required" is
disabled.
47