AirLive WL-1600GL - Manual (Page 12)

AirLive WL1600GL Broadband Router
Rear Panel
Figure 3: Rear Panel
Antenna One 2 dbi antenna.
WAN Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
LAN Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Reset Button This button has two (2) functions:
• Reboot. When pressed and released, the Wireless Router will
reboot (restart).
• Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED
LED has flashed TWICE.
4. Release the Reset Button. The Wireless Router is now using the
factory default values.
Power port Connect the supplied power adapter here.
6