AirLive RS-1200 - Manual (Page 82)

82
Define the required fields of Authentication
Authentication Management
„ Provide the Administrator the port number and valid time to setup
RS-1200 authentication. (Have to setup the Authentication first)
‹ Authentication Port: The internal user have to pass the authentication
to access to the Internet when enable RS-1200.
‹ Re-Login if Idle: When the internal user access to Internet, can setup
the idle time after passing authentication. If idle time exceeds the time
you setup, the authentication will be invalid. The default value is 30
minutes.
‹ URL to redirect when authentication succeed: The user who had
passes Authentication have to connect to the specific website. (It will
connect to the website directly which the user want to login) The default
value is blank.
‹ Messages to display when user login: It will display the login
message in the authentication WebUI. (Support HTML) The default
value is blank (display no message in authentication WebUI)
z Add the following setting in this function: (Figure8-1)
Figure8-1 Authentication Setting WebUI