AirLive RS-1200 - Manual (Page 141)

141
STEP 10. Enter the following setting in Tunnel of VPN function: (Figure11-28)
„
Enter a specific Tunnel Name.
„
From Source: Select LAN
„
From Source Subnet / Mask: Enter 192.168.20.0 / 255.255.255.0.
„
To Destination: Select To Destination Subnet / Mask.
„
To Destination Subnet / Mask: Enter 192.168.10.0 / 255.255.255.0.
„
IPSec / PPTP Setting: Select VPN_B.
„
Select Show remote Network Neighborhood.
„
Click OK. (Figure11-29)
Figure11-28 New Entry Tunnel Setting
Figure11-29 Complete New Entry Tunnel Setting