AirLive RS-1200 - Manual (Page 30)

30
DHCP
STEP 1﹒Select DHCP in System and enter the following settings:
„ Domain Name：
Enter the Domain Name
„ DNS Server 1:
Enter the distributed IP address of DNS Server1.
„ DNS Server 2:
Enter the distributed IP address of DNS Server2 .
„ WINS Server 1:
Enter the distributed IP address of WINS Server1.
„ WINS Server 2:
Enter the distributed IP address of WINS Server2.
„ LAN Interface:
‹ Client IP Address Range 1:
Enter the starting and the ending IP address dynamically assigning to
DHCP clients. The default value is 192.168.1.2 to 192.168.1.254 (it
must be in the same subnet)
‹ Client IP Address Range 2:
Enter the starting and the ending IP address dynamically assigning to
DHCP clients. But it must in the same subnet as Client IP Address
Range 1 and the range cannot be repeated.
„ DMZ Interface: the same as LAN Interface. (DMZ works only if to
enable DMZ Interface)
„ Leased Time: Enter the leased time for Dynamic IP. The default time is
24 hours.
„ Click OK and DHCP setting is completed. (Figure2-14)