AirLive RS-1200 - Manual (Page 230)

230
Interface
STEP 1﹒Enter Interface in Status function; it will list the setting for each
Interface: (Figure18-1)
„ PPPoE Con. Time: The last time of the RS-1200 to be enabled
„ MAC Address: The MAC Address of the Interface
„ IP Address/ Netmask: The IP Address and its Netmask of the
Interface
„ Rx Pkts, Err. Pkts: To display the received packets and error
packets of the Interface
„ Tx Pkts, Err. Pkts: To display the sending packets and error
packets of the Interface
„ Ping, WebUI: To display whether the users can Ping to the
RS-1200 from the Interface or not; or enter its WebUI
„ Forwarding Mode: The connection mode of the Interface
„ Connection Status: To display the connection status of WAN
„ DnS/ UpS Kbps: To display the Maximum
DownStream/UpStream Bandwidth of that WAN (set from
Interface)
„ DnStream Alloca.: The distribution percentage of DownStream
according to WAN traffic
„ UpStream Alloca.: The distribution percentage of UpStream
according to WAN traffic
„ Default Gateway: To display the Gateway of WAN
„ DNS1: The DNS1 Server Address provided by ISP
„ DNS2: The DNS2 Server Address provided by ISP