AirLive RS-1200 - Manual (Page 194)

194
Chapter 15
LOG
Log records all connections that pass through the RS-1200’s
control policies. The information is classified as Traffic Log, Event Log,
and Connection Log.
Traffic Log ’s parameters are setup when setting up policies. Traffic logs
record the details of packets such as the start and stop time of connection,
the duration of connection, the source address, the destination address
and services requested, for each control policy.
Event Log record the contents of System Configurations changes made by
the Administrator such as the time of change, settings that change, the IP
address used to log in… etc.
Connection Log records all of the connections of RS-1200. When the
connection occurs some problem, the Administrator can trace back the
problem from the information.
How to use the Log
The Administrator can use the log data to monitor and manage the device
and the networks. The Administrator can view the logged data to evaluate
and troubleshoot the network, such as pinpointing the source of traffic
congestions.