AirLive RS-1200 - Manual (Page 38)

38
Connect Mode:
„ Display the current connection mode:
‹ PPPoE (ADSL user)
‹ Dynamic IP Address (Cable Modem User)
‹ Static
IP Address
Saturated Connections:
„
Set the number for saturation whenever session numbers reach it,
the RS-1200 switches to the next agent on the list.
Priority:
„ Set priority of WAN for Internet Access.
Connection Test:
„ To test if the WAN network can connect to Internet or not. The testing ways are as
following:
‹ ICMP： To test if the connection is successful or not by the Ping IP you set.
‹ DNS： To test if the connection is successful or not by checking Domain
Name.
Upstream/Downstream Bandwidth:
„
The System Administrator can set up the correct Bandwidth of WAN network
Interface here.
Auto Disconnect:
„
The PPPoE connection will automatically disconnect after a length of idle time (no
activities). Enter the amount of idle time before disconnection in the field. Enter “0”
if you do not want the PPPoE connection to disconnect at all .