AirLive OD-300CAM - Manual (Page 77)

AirLive OD-300CAM User ’s Manual 74
6.6 Alarm Input
When you click Alarm Input on the Advance mode menu, the Alarm input setting menu appears. You
can set in this menu to control the external alarm input of I / O port on the rear of the device linked to
FTP, SMTP, and HTTP sending function.
6.6.1 Setting
Sensor input 1: Click it on for using external sensor which is connected to sensor input1 of the camera I /
O port.
 Trigger condition: Select High signal output and Low signal output as your alarm.