AirLive OD-300CAM - Manual (Page 72)

69 AirLive OD-300CAM User ’s Manual
6.4.1 Setting
Alarm output: To activate the Alarm output function, select On. When you do not use the Alarm output
function, select Off.
 Digital output: Select High signal output and Low signal output as your alarm.
Note: That will be the same setting as alarm input function. (P lease go “Setting
→Advance → Alarm input → Setting”). For more details, you can check Chapter 6.6.
 Trigger condition: Select th e mode of the Alarm output function. You can choose “Alarm” or
“Timer.”
 Alarm: Controls alarm output by synchronizing with an external sensor input or the built-in activity
detection function.
 Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function page.