AirLive OD-300CAM - Manual (Page 73)

AirLive OD-300CAM User ’s Manual 70
Note: You can set motion detecti on at motion detection page. (please go “Setting
→Advance → Motion detection → Setting”). For more details, you can check Chapter 6.8.
Note：Motion Detection works only when the Video mode is set to MPEG4 and the
Cropping is set to Off.
 Use Alarm Buffer：Select Use alarm buffer when you forward the image / audio of before and
after the alarm detection (pre-alarm, post-alarm). If you do not select it, only the image of the
moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer
setting menu.
Note:
You can set the alarm buffer function at alarm buffer page. (Please go “Setting →Advance
→ Alarm buffer → Setting”). For more details, you can check Chapter 6.7.
 Alarm Input：Select the connected alarm. Sensor input1: The external sensor which is
connected to sensor input1 of the alarm input.
Note:
You can set the alarm input function at alarm input page. (Please go “Setting → Advance
→ Alarm input → Setting”). For more details, you can check Chapter 6.6.