AirLive OD-300CAM - Manual (Page 69)

AirLive OD-300CAM User ’s Manual 66
 Use Alarm Buffer：Select Use alarm buffer when you forward the image / audio of before and
after the alarm detection (pre-alarm, post-alarm). If you do not select it, only the image of the
moment of the alarm detection is forwarded. Click Alarm buffer to display the Alarm buffer
setting menu.
Note:
You can set the alarm buffer function at alarm buffer page. (Please go “Setting →Advance
→ Alarm buffer → Setting”) For more details, you can check Chapter 6.7.
 Parameter: t he parameter of CGI (defined in URL of HTTP→General) is from your
target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.