AirLive OD-300CAM - Manual (Page 68)

65 AirLive OD-300CAM User ’s Manual
 Alarm
 Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function page.
Note: You can set motion detection at motion detection page. (P lease go “Setting
→Advance → Motion detection → Setting”) For more details, you can check Chapter 6.8.
Note： Motion Detection works only when the MPEG4 function is On.
 Parameter: the parameter of CGI (defined in URL of HTTP→General) is from your
target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.