AirLive OD-300CAM - Manual (Page 70)

67 AirLive OD-300CAM User ’s Manual
 Alarm Input：Select the connected alarm. Sensor input1: The external sensor which is
connected to sensor input1 of the alarm input.
Note:
You can set the alarm input function at alarm input page. (Please go “Setting → Advance
→ Alarm input → Setting”) For more details, you can check Chapter 6.6.
 Parameter: the parameter of CGI (defined in URL of HTTP→General) is from your
target device. For example, move=down.
 Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.