AirLive OD-300CAM User Manual
Page 33
AirLive OD-300CAM User
’s Manual
30
Use the following IP address: Select this when the fixed IP address is set.
IP address: Enter the IP address of the device.
Subnet mask: Enter the subnet mask.
Default gateway: Enter the default gateway.
Use the following DNS server address: Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server: Enter the IP address of the primary DNS server.
Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary.
HTTP port number: Select 80 in general situations. If you want to use a port number other than
80, select the text box and enter a port number between 1024 and 65535.
When you have set the HTTP port number to a number other than 80 on the Network setting
page or in the Setup Program, access the device by typing the IP address of the device on the
web browser as follows: Example: when HTTP port number is set to 2000
Note: The IP Camera needs to be rebooted after it finishes changing the network setting
completely.