beautypg.com

2 set static dhcp, 3 domain name, 4 802.11d spanning tree – AirLive N.TOP User Manual

Page 44: 5 clone mac address, 6 enable airlive ip finder management

background image

5. System Configurations

39

AirLive N.TOP User’s Manual

5.2.2 Set Static DHCP

If you want to lock IP address to a MAC address, you should add DHCP clients to the

“Static DHCP List”. Up to 40 entries can be entered. Below is the procedure for adding
an entry:

1. Enter the MAC address of the device

2. Enter the IP address of the device

3. Click on the “Apply Changes” button

5.2.3 Domain Name

You can enter the network area name here.

5.2.4 802.11d Spanning Tree

Select Disabled or Enabled form the pull-down list.

5.2.5 Clone MAC Address

You can change the MAC address of your LAN port to other value here.

5.2.6 Enable AirLive IP Finder Management

By enabling the function, IP Finder could discover the N.TOP in the LAN.


See also other documents in the category AirLive Accessories for video: