AirLive N.TOP - Manual (Page 18)

3. Configuring the N.TOP
13 AirLive N.TOP User’s Manual
The N.TOP offers web browser (http) as management interface. In this chapter, we will
explain N.TOP’s web management interface and how to get into them.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the password and SSID
are case sensitive.
The default IP address is: 192.168.1.254 Subnet Mask: 255.255.255.0
The default user’s name is: admin
The default password is: airlive
The default SSID is: airlive
The default wireless mode is : AP mode
After power on, please wait for 1 minutes for N.TOP to finish boot up
Please remember to click on “Apply” for new settings to take effect
You must reboot the N.TOP after you finish all the settings for changes to
take effect
By Default, the DHCP server is turned off, please to configure your PC’s IP
address manually.
3.2 Prepare your PC
The N.TOP can be managed remotely by a PC through either the wired or wireless network.
The default IP address of the N.TOP is 192.168.1.254 with a subnet mask of 255.255.255.0.
This means the IP address of the PC should be in the same subnet of the N.TOP..
3
3.
Configuring the N.TOP