AirLive N.TOP - Manual (Page 34)

4. Wireless Settings
29 AirLive N.TOP User’s Manual
Pre-Shared Key: Enter the password key here..
WPA Radius
Wi-Fi Protected Access (WPA) Enterprise uses Radius Server as the authenticator.
WPA2 adds full support for 802.11i standard and the CCMP (AES Encryption). The
WPA-Mixed tries to authenticate wireless clients using either WPA or WPA2.
4.2.10 WMM
Wireless -> WMM
Wi-Fi Multimedia (WMM) is a standard to prioritize traffic for multimedia applications. The
WMM prioritize traffic\ on Voice-over-IP (VoIP), audio, video, and streaming media as well
as traditional IP data over the AP.
The Wi-Fi Multiple Media function is available under 2.4GHz (B), 2.4GHz (G) and 2.4GHz
(B+G) band, and it is enabled under 2.4GHz (N), 2.4GHz (G+N) and 2.4GHz (B+G+N)
band.
4.2.11 Data Rate
Wireless -> Data Rate
Data Rate is the physical speed of transmission. The default setting is Auto. In “Auto”
mode, the data rate will adjust according to the connection condition. It is advised to put
the data rate in Auto.
4.2.12 N Data Rate
Wireless -> N Data Rate
N Data Rate is the physical speed of transmission for 802.11n. The default setting is Auto.
In “Auto” mode, the data rate will adjust according to the connection condition. It is
advised to put the data rate in Auto. However, you can also force the radio to operate at
specific data rate. The highest for 11n is MCS15.