AirLive N.TOP - Manual (Page 16)

2. Installing the N.TOP
11 AirLive N.TOP User’s Manual
LED Display Status Description
On The access point is switched on and correctly
powered.
Slow
Blinking System is reset to factory default, at the same time
WLAN LED is on.
1
PWR
Off The access point is switched off.
On Wireless WPS mode is enabled.
Off Wireless network is switched off.
2
WLAN
Flashing Wireless LAN activity (transferring or receiving data).
On LAN port is connected
Off LAN port is not connected
3
LAN
Flashing LAN activity (transferring or receiving data)
2.5 Button and Connector Definition
This section describes the button behavior of N.TOP.
You can find the Button in front of the N.TOP.