2 lan interface setup, 1 dhcp settings – AirLive N.TOP User Manual

Page 43

Text mode
Original mode

5. System Configurations

AirLive N.TOP User’s Manual 38

5.2 LAN Interface Setup

System >> LAN Interface Setup
This menu is where you can configuration all the aspect about LAN interface including IP
address, DHCP server settings etc.

5.2.1 DHCP Settings

DHCP Service: You can enable or disable DHCP server here.

Disable(default): Disable DHCP server

Enable: The N.TOP will act as DHCP server to provide IP addresses to
the clients on the LAN/Wireless interface. By default, the DHCP server

is on.

DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address.. Click on “Show Client” to see the current DHCP client table.

DHCP Release Time: You can define how long the N.TOP will reserve IP
address for a particular PC or Device here.

Device IP
Settings

DHCP
Settings