AirLive N.TOP - Manual (Page 28)

4. Wireless Settings
23 AirLive N.TOP User’s Manual
In this chapter, we will explain about the wireless settings in web management interface.
Please be sure to read through Chapter1’s Wireless Operation Mode and Chapter 3’s
“Introduction to Web Management” and “Initial Configurations” first.
Although router mode settings (WAN port, Virtual Server…etc) are part of the wireless
settings menu, they will be explained in Chapter 5.
4.1 About Wireless Modes
The N.TOP has total of 5 operation modes to suit different application requirements. In
this section, we will explain how to change between wireless operation modes. For
explanation on each different operation mode, please read Chapter 1 section 1.4 first.
Below is the summary table for different wireless modes:
N.TOP Wireless Operation Mode
Wireless Mode Radio WAN Application
Access Point AP None Hotspot (Indoor and Outdoor)
Client Client None WISP Client
Bridge Bridge None Building to Building network
WDS Repeater AP + Client None Extend distance of another WDS
AP/Router
Universal Repeater AP + Client None Extend distance of any AP Router
To change between different wireless modes, please to go the “Wireless” menu, on the left
hand side bar, you will see the “Wireless Mode” pull down menu which displays the current
operation mode.
4
4.
Wireless Settings