AirLive N.TOP - Manual (Page 25)

3. Configuring the N.TOP
AirLive N.TOP User’s Manual 20
3.6.1 Change the Device’s IP Address
The default IP address is at 192.168.1.254. You should change it to the same subnet as
your network. Also, if you want to manage N.TOP remotely, you have to set the Gateway
and DNS server information.
To setup the IP settings for N.TOP, please select “System Configuration” -> LAN Interface
Setup”. After entering the IP information, click on “Apply Changes” to finish.
3.6.2 Set the Time and Date
It is important that you set the date and time for your N.TOP so that the system log will
record the correct date and time information. Please go to “System Configuration”
->Time Settings. We recommend you choose “Enable NTP” so the time will be keep
even after reboot. If your N.TOP is not connected to Internet, please enter the time
manually. Please remember to select your local time zone and click “Apply” to finish.
1
2