AirLive ES-6000 - Manual (Page 38)

37
Figure 4-19 Enter the second entry to enable relay
Figure 4-20 Complete the second entry
Step2. Enable external senders to send mails via relay, please go to Mail Management Æ Configure
Æ Mail Relay for settings:
„ Click New Entry .
„ Check Domain Name . (This enables relay to this Domain name)
„ Domain Name set as airlive.com
„ Click OK to complete the setup process. (Figure 4-21, 4-22)
Figure 4-21 Enter an domain name to enable relay
Figure 4-22 Domain name setup completed
When Local SMTP Authentication is activated, internal accounts sending mails off-site does not
required setting up the Relay.