AirLive AirMax5X - Manual (Page 39)

4. Web Management: Operation Mode Settings
AirLive AirMax5X User’s Manual
33
„ Disable MAC address control list: When selected, no MAC address filtering will
be performed.
„ Enable GRANT address control list: When selected, data traffic from only the
specified devices in the table will be allowed in the network.
„ Enable DENY address control list: When selected, data traffic from the devices
specified in the table will be denied/discarded by the network.
To add a MAC address into the table, enter a Mnemonic Name and the MAC Address,
and then click Add. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding Select boxes and then press Delete Selected.
4.2.2 Client infrastructure mode setting
This mode is also known as “Client” mode. In Client Infrastructure mode, the AirMax5X acts
as a wireless adapter to connect with a remote Access Point. Users can attach a computer
or a router to the LAN port of AirMax5X to get network access. This mode is often used by
WISP on the subscriber’s side.
In This mode, all two Ethernet ports act as LAN Port. The setting of Client infrastructure
mode is similar of the AP mode, but it need to set the remote AP’s SSID. So please refer
the chapter 4.2.1.5 ~ 4.2.1.11