AirLive A.DUO User Manual

Page 82

4. Wireless and WAN Settings

AirLive A.DUO User’s Manual

WEP Key: You can set up to 4 keys; each key can have different Key Length and Key type.
When you add an entry to the WDS setting and select WEP encryption, the system will ask

you which key to use. All devices on the network must have the same sets of keys, but each
link can have use different key. We recommend using WEP-152 whenever possible for

better security.

Adding a new WDS link

The WDS links are created by entering the remote Bridge’s information. This process must

be repeated on both side of the bridge.

Name: This is the name for the WDS Link. You can enter any name for your
own reference (i.e. WarehouseLink).

SSID: SSID is the network ID for the wireless link. If you have more than one
WDS link or if you want to make WDS connection with Mikrotik devices, this

field is required. Each WDS Link must have a different SSID name. If you only

have one WDS link, you can leave this field empty.

MAC Address: Please enter the remote bridge’s wireless MAC address in
this field. This wireless SSID can be found on the device label. You can also
use Site Survey function to assist you.

Select Security Settings: You can choose to use WEP encryption for better
security. It is necessary to enter the same set of keys in the same WDS
network. When you select WEP, the A.DUO will ask you to select from one of

the 4 keys. Please be sure to select the same key on both side of the link.

Press

Add to finish