AirLive A.DUO User Manual
Page 78
4. Wireless and WAN Settings
71
AirLive A.DUO User’s Manual
Enable Radio: Use this check box to turn on or turn off the radio.
Network ID (SSID): This is to change your SSID.
Disable SSID Broadcasting: Enable the check box if you want to hide your
SSID in the network. This prevent an un-welcomed client survey your radio.
Radio Mode: Connection modes on A.DUO and its wireless client. Note that
the client must support the same mode as A.DUO to connect.
Channel: 11a supports channel 100 to 140. 11g depends on the country,
USA/Canada supports channel 1 to 11, Europe supports channel 1 to 13,
Japan supports channel 1 to 14, France supports channel 10 to 13, and Span
supports channel 10 to 11.
Enable Radio eXtended Range: Check this box to extend the wireless
coverage range, this is provided by Atheros’s eXtended Range (XR)
technology.
Enable Client Isolation (Privacy Separator): This is to prohibit data
transmission between each wireless client stations.
Enable 802.11d: This is to prevent network loop applying to the spanning tree
standard. This option can be found under the “Advanced Wireless Settings”