AirLive A.DUO - Manual (Page 157)

7. Command Line Interface
AirLive A.DUO User’s Manual 150
Radio1 authentication type : wep !
set security interval <0~300>
Purpose: to set the WPA or WPA2 security policy
Example:
Command> set security A.DUO wpa2 tkip interval 300
Radio1 authentication type : wpa2 !
set security interval
<0~300>
Purpose: to set the WPA-PSK or WPA2-PSK security policy
Example:
Command> set security A.DUO wpa2-psk aes interval 300 12345678
Radio1 authentication type : wpa2-psk !
set antenna
Purpose: To set the antenna to use horizontal, vertical, diversity polarizations.
Example:
Command> set antenna horizontal
Antenna setting is Horizontal
set ratemode
Purpose:
Example:
Command> set ratemode full
Rate mode is Full(20Mhz)
set noise immunity
Purpose: To enable/disable the noise immunity level
Example:
Command> set noise immunity on
Noise immunity is enable