AirLive A.DUO - Manual (Page 81)

4. Wireless and WAN Settings
AirLive A.DUO User’s Manual 74
4.4.1 WDS Bridge Settings
In this section, we will talk about how to configure the WDS Settings. WDS Bridges are
using BSSID (AP’s Wireless MAC address) to authenticate each other. Therefore, it is
necessary to know the remote Bridge’s wireless MAC addresses. You can always do a
“Site Survey” to find out the MAC Addresses.
When you click on WDS settings, the following screen will appear:
This is where you
enter the remote
Bridge’s information.
The SSID must be
different between
each Bridge.
Here are the
encryption key
settings for
WEP. Please
make sure all
bridges in the
WDS network
enter the same
keys.
After you add
a remote
Bridge, it will
be display
here. Up to 4
entries are
possible