AirLive A.DUO - Manual (Page 139)

7. Command Line Interface
AirLive A.DUO User’s Manual 132
7.1
31B
System Commands
ping >
Purpose: to ping a remote IP address
Example:
Command> ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.8 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.0 ms
change password
Purpose: Change login password
Example:
Command> change password 123
password is set to: 123
ftptest 11a
Purpose: Test if a SSID’s connection is okay
Example:
Command> ftptest airlive 11a 40
Set SSID: airlive, mode = 11a, channel = 40 ok!
save config
Purpose: save configuration file. Please remember to “save config” after
making changes
Example:
Command> save config
None
clear config
Purpose: Clear configuration to default
Example:
Command> clear config
Are you sure? (y/n) : y
Write flash block [/dev/mtd3]
This is the command
Here explains the usage
of the command
Example
command and
response